Hose (Pump) 75mm (3")
WAT0065
Hose (Pump) 75mm (2") 20' of Suction & Delivery Hose Included with Pump. Additional Lengths of Hose Chargeable.
** All rates exclude VAT **
Extension Hose (Water) 20m (66') Pressure Washer
WAT0130
Extension Hose (Water) 20m (66'0 pressure Washer Inlet Hose
Traffic Film Remover 25Ltr
CHE020
Non -Caustic
Pressure Washer 240V 2000Psi
WAT00802
Pressure Washer 240V 2000Psi. **Patio (Surf) Cleaner Available for Hire with This MacHine. Traffic Film Remover Availalbe for Sale**
Pre/Washer-Petrol 2000-3000Psi
WAT0080P
Pressure Washer-Petrol 2000-3000Psi
Pressure Washer 240V Steam
WAT00902
Pressure Washer 240V Cold/Hot, Water & Steam
Drain Clearer 2000Psi (Pressure Washer)
WAT0110
Drain Clearer 2000Psi
Water Bowser 1100Ltr (Highway)
WAT0200
Water Bowser 1100Ltr (Highway). unladen Weight 350Kg max Gross Weight 1500Kg
Pump Submersible 110/240v 50mm(2")
WAT00101
Pump Submersible 110v/240v 50mm(2")Hire includes 20' of Delivery Hose.
Pump Submersible 110v/240v 50mm(2")
Hire includes 20' of Delivery Hose.
The HS series comprises a 50mm (2") has a solid cast aluminium body, cast iron pump casing and an impact-resistant PVC strainer base for durability during robust handling. The urethane vortex impeller offers excellent wear resistance in site applications where water contains sand and silt in suspension, thus maintaining performance and reliability. The HS2.4S has a 403 stainless steel shaft, that is fitted with an ultra hardwearing, silicon carbide, double mechanical seal (in an oil chamber), and have a stirring device to reduce blockages. Used predominantly as contractor pumps on site drainage duties, they can also be used in other industrial applications.
Sub Pump Specifications.pdf
Pump Centrifugal 50mm Petrol
WAT0030P
Pump Diaphragm Pump 50mm Petrol
WAT0035P
Pump Diaphragm Pump 50mm Petrol. Self Priming from Dry, will Pump Slurry, Sand, Silt and Solids Up to 13mm (1/2")
Pump Residue 110/240v
WAT00401
Pump Residue 110v/240v. for Puddles Etc, will Pump Down to 2mmHire Includes 20' (6mtrs) of Delivery Hose
Pump Residue 110v/240v. for Puddles Etc, will Pump Down to 2mm
Hire Includes 20' (6mtrs) of Delivery Hose
The LSC1.4S or “puddle sucker” is able to pump water down to 1mm, which makes it suitable for pumping large or small areas of nuisance water found on flat surfaces. It incorporates a dual position 25mm(1”) outlet port, to enable the user to position the outlet hose horizontally or vertically and avoid it kinking (50mm(2”) is also available, as an optional extra). For improved durability, during robust handling, it has a pressed steel outer casing and a cast aluminium pump stand to offer increased protection of the steel and rubber base plate. A combination of a rubber pump chamber and a urethane vortex impeller enables the design to offer excellent wear resistance in site water applications that contain sand and silt in suspension, thus maintaining performance and reliability. An additional feature is an integral swing check valve to prevent back flow of water from the discharge hose. Quality is further enhanced with a 403 stainless steel shaft that is fitted with an ultra hardwearing, silicon carbide, double mechanical seal (in an oil chamber), and an oil lifter to maintain seal lubrication during operation in any position. This feature, combined with the water and air cooling route to the top outlet, allows the pump to operate for extended periods with little or no water. Used widely by hire outlets, utilities and flood control companies. Supplied with 10 metres of heavy duty rubber power cable.
Residue Pump Specifications.pdf
Hose (Pump) 25mm (1")
WAT0050
Hose (Pump) 25mm (1") 20' Included with Pump additional Hose Lengths Chargeable
Hose (Pump) 50mm (2")
WAT0060
Hose (Pump) 50mm (2") 20' Hose Included with Pump additional Lengths of Hose Chargeable
You can change quantities and hire period before submitting your estimate request.