Results for power flush

(12 products found)

45 Power Flush 240v (Central Heating)

PLU01052

Central heating Power flush. The Ultimate Power Flushing & Descaling Pump.

Power Flush User Guide

Quick Guide 


Rates

CF90 QUANTUM2

THE ULTIMATE POWER FLUSHING PUMP

Introducing the all-new CF90 Quantum2 domestic power flushing pump.

The all important flow rate of the original Quantum has been increased by a further 10%, without increasing maximum pressure beyond 1.8 bar, to ensure that no damage will be done to a heating system. The flow rate is more than double that of most power flushing pumps on the market, enabling it to remove more debris from a system in less time.

The Quantum2 has a direct drive system to give run-dry capability, whilst the tank capacity has been increased to 57 litres, with virtually no increase in footprint, for ease of location on site and in engineers’ vans. The unit is highly manoeuvrable, with an extended handle and 200mm wheels enabling it to be wheeled up kerbs and stairs.

Performance is similar to commercial power flushing pumps and, although it can be used on systems with three storeys and 35-40 radiators, it may also be used on very small micro-bore heating systems with great effect.

High temperature capability to 75°C is an important feature of the pump, as the efficiency of most flushing chemicals is enhanced with increased temperature. The Quantum2 can be used with dispersant chemicals that need higher temperatures to perform, as well as more powerful ‘one shot’ flushing chemicals, added through the large diameter filler cap.

Sludge and corrosion deposits are dislodged by high velocity water, the direction of which can be reversed instantaneously to create turbulence in radiators. Fresh water is then driven through the system to purge the debris to waste. Progress can be clearly seen at all times through the translucent tank and clear hoses.

Hire Rates Deposit: £350.00
4 hrs 24 hrs 2 Days 3 Days 7 Days Extra Day
50.00 50.00 63.00 76.00 90.00 12.86
Add extra days in cart.

35 Central Heating Power Flush Combi Magnet

PLU01053

Can be used in conjunction with Central Heating Power Flush to improve power flushing efficiency.


Rates

Power flush magnet instructions

MAGNETIC POWER FLUSHING FILTER


Power flushing is the fastest and most
effective means of cleansing sludge and corrosion debris from central
heating systems, utilising a high flow of water to loosen and ultimately
expel the debris, usually containing large quantities of black iron
oxide, from the system.

Hire Rates Deposit: £80.00
4 hrs 24 hrs 2 Days 3 Days 7 Days Extra Day
11.00 11.00 14.00 17.00 20.00 2.86
Add extra days in cart.

25 Power Float 910mm (36") Petrol

CON0110P

Power Float 910mm (36") Petrol. 

Blade Wear Charged Extra.Floating Plate Available for This Item.Using These Tools to Finishing Concrete Slabs will Improve Surface Strength and Durability as Well as Appearance 


Rates

PMT36 Power Trowel / Power Float
900mm (36") trowelling diameter.
Common Features

Reliable precision gearbox.
Excellent weight distribution for easy operation.
Adjustable handle height to suit operator.
Instant Stop clutch for operator safety.
Smooth pitch adjustment.
Forward lifting bar aids manual handling.
Lifting eye included as standard.
Fitting for standard 6×14 Finish or 8×14 Combination blades.
Can be fitted with standard Float Disc / Pan.


Hire Rates Deposit: £250.00
4 hrs 24 hrs 2 Days 3 Days 7 Days Extra Day
34.00 34.00 46.00 54.00 63.00 9.00
Add extra days in cart.

15 Transformer 3Kva Power Tool 1X32A

TRA00302-1

Transformer 3Kva Power Tool 1X32A


Rates
Hire Rates Deposit: £50.00
4 hrs 24 hrs 2 Days 3 Days 7 Days Extra Day
4.85 4.85 6.10 7.30 8.50 1.21
Add extra days in cart.

15 Transformer 5Kva Power Tool Rated 2X16A 1X32A Outlets

TRA00502-1

Trans 5Kva P/Tool 2X16A 1X32A


Rates
Hire Rates Deposit: £60.00
4 hrs 24 hrs 2 Days 3 Days 7 Days Extra Day
8.00 8.00 9.90 12.00 14.00 2.00
Add extra days in cart.

10 Floating Plate (Power Float)

CON0120

Floating Plate (Power Float)


Rates
Large Circular Disc for use with Power Float  
Hire Rates Deposit: £25.00
4 hrs 24 hrs 2 Days 3 Days 7 Days Extra Day
6.00 6.00 7.50 9.00 10.00 1.21
Add extra days in cart.

15 Transformer 3Kva Power Tool 2X16A

TRA00202-1

Trans 3Kva P/Tool 2X16A


Rates
Hire Rates Deposit: £50.00
4 hrs 24 hrs 2 Days 3 Days 7 Days Extra Day
4.85 4.85 6.10 7.30 8.50 1.21
Add extra days in cart.
Purchase Price

45 Power Flush Central Heating Descaling

CHE300

Central Heating Power Flush. 

 

£16.35

POWER FLUSH FX2

ONE SHOT FLUSHING AND DESCALING LIQUID

Power Flush FX2 is designed for use with CLEARFLOW power flushing pumps, and is the flushing liquid to choose for the most rapid and effective results. It is a vigorous 'one shot' flushing and descaling liquid which starts to work immediately upon addition to the system.

Power Flush FX2 enables heating engineers to thoroughly cleanse a heating system in just one visit, a significant benefit when so many households have both partners working full time.

When using Power Flush FX2 there is normally no need for a prior visit to pre-treat the system with flushing chemicals several days before the power flush, saving on expense and inconvenience.

Power Flush FX2 rapidly dissolves and mobilises the rust, sludge and corrosion deposits which accumulate in systems as a result of gradual decay, whether from corrosion as a result of bad design and air ingress, or lack of an effective corrosion inhibitor.

Removal of these deposits can cure or prevent circulation problems such as completely or partially cold radiators, frequent circulating pump failure and boiler noises caused by debris accumulating in the heat exchanger.

Purchase Price

30 Hyper-Flush Non Acid Flush (Power Flush)

CHE330

Hyper-Flush Non Acid Flush (Power Flush) 

Hyper Flush User guide

£10.25

HYPER-FLUSH

EXTRA POWER, NON-ACID FLUSHING CHEMICAL FOR USE WITH SYSTEM CIRCULATOR PUMPS, OR WITHA POWER FLUSHING PUMP

FOR USE ON DOMESTIC OR COMMERCIAL SYSTEMS.

HYPER-FLUSH is the non-acid flushing liquid with extra solvency power to take debris into suspension for easy removal by power flushing. It penetrates, loosens and dissolves rust, sludge, corrosion and light scale deposits during normal operation of the system, without formation of particulate matter to cause blockages and damage pumps. HYPER-FLUSH is non-corrosive and works at a near neutral pH, enabling it to be used on older systems showing signs of severe neglect, or which may be in too poor a condition for use of Power Flush FX2 liquid.

HYPER-FLUSH should also be used on systems which have aluminium radiators, or boilers with aluminium heat exchangers. It may be used with all metals commonly used in heating systems and does not cause deterioration of non-metallic components.

HYPER-FLUSH can even loosen complete blockages and is therefore also an excellent pre-treatment for systems with radiators having no flow as a result of heavy sludge build up. There is no "gassing" during cleaning, and no need to bleed radiators during the process. Self neutralising and passivating properties remove the need for further flushing procedures after use, and metal surfaces are left clean and corrosion free.Hyper-Flush User Guide

Purchase Price

29 Scale and Corrosion Inhibitor Power Flush

CHE320

Scale and Corrosion Inhibitor Systemsafe Dm. 

System Safe DM User Guide 

£12.40

SYSTEMSAFE-DM

SCALE & CORROSION INHIBITOR FOR ALL SYSTEMS

Once a heating system has been power flushed to remove sludge and corrosion deposits, it is important to protect it from further deterioration.

This can be achieved by treating the system water with SYSTEMSAFE-DM, a balanced blend of corrosion and scale inhibitors, formulated to provide complete protection against system corrosion and scale formation.

It gives long term protection to central heating systems, preventing internal corrosion, scale deposition and boiler noises, and extends the life of the system and maintains its operational efficiency.

The formation of black iron oxide sludge, which accumulates in low flow areas to give flow problems and cold spots on radiators, is prevented, as is the electrolytic and oxidic corrosion which leads to localised pin-hole corrosion and leaks.

SYSTEMSAFE-DM may be used with all metals commonly used in heating systems, including iron, steel, brass, copper and aluminium. It is simply added to the heating system and requires no further action.

SYSTEMSAFE-DM has passed the Buildcert/DWTAperformance test and approval process, so you can be sure that it will give long term scale and corrosion protection to heating systems.

Purchase Price

24 System-Hush (Power Flush)

CHE340

System-Hush (Power Flush)

£10.25

SYSTEM-HUSH

SOLUTION FOR 'KETTLING' AND BOILER NOISE

Some heating systems can be susceptible to noise problems as a result of baked-on corrosion and limescale deposits on boiler heat exchangers.

Whilst power flushing may cure this, on some systems it may be an ongoing problem. The addition of one litre of SYSTEM-HUSH, together with SYSTEMSAFE-DM, is recommended to cleanse the heat exchanger during normal system operation. SYSTEM-HUSH may be left in the system without draining.

SYSTEM-HUSH works at a near neutral pH, taking rust, corrosion and light scale deposits into solution, without formation of particulate matter to cause blockages and damage pumps. Boiler heat transfer surfaces are left clean, restoring efficiency, and boiler noises are eliminated.

SYSTEM-HUSH may be used with all metals commonly used in heating systems, including ferrous metals, brass, copper, aluminium and galvanised steel. It does not cause deterioration of metallic or non-metallic components when used as recommended, enabling it to be used on older systems which may be in too poor a condition for aggressive descaling chemicals.

The self-neutralising and passivating properties of SYSTEM-HUSH remove the need for time consuming flushing procedures after use, and metal surfaces are left clean and corrosion free

Purchase Price

15 Transformer 5 Kva Power Tool Rated

TRA050

2 * 16A

2.5Kva Continuous 

£153.50

Purchase Price

My Tool Bin

Empty
Proceed To Order

You can change quantities and hire period before submitting your estimate request.


Site Map | Printable View | © 1977 - 2017 Mayday Plant and Tool Hire    Log on